Automatic gearshift stalls and use
    101M automatic transmission has four forward gear and a reverse gear, through the selector operating lever in the gear selection area to choose from P, R, N, D, 3,2,1. The name and use of each location are as follows.
    A. "P" bit. "P" bit for the parking file, only in the vehicle completely stopped when the shift control handle can be moved into the position. After moving into this position, the drive wheels of the car are locked by the mechanism so that the wheels can not be rotated. When you move the selector handle out of this position, you must depress the brake pedal and press the lock button on the selector lever.
    B. "R" bit. "R" bit for the reverse gear, only when the vehicle is stationary and the engine idling operation, can only shift control handle into the "R" bit. When moving the selector lever into or out of the "R" position, simply press the button on the selector lever without the need to depress the brake pedal. Should pay special attention to is: in the vehicle before the car in the process, do not mistakenly shift control handle into the "R" bit, especially in the automatic transmission in a state of emergency, do not in the forward drive will choose gear Handle the handle into the "R" position, otherwise it will seriously damage the automatic transmission.
    C. "N" bit. "N" bit is neutral, when the ignition switch is on, the vehicle is still or the speed is less than 5km / h, the shift selector handle into the "N" bit, the selector joystick will be locked solenoid valve lock only. When moving the selector lever out of the "N" position, press the brake pedal and press the button on the selector lever, but when the speed is higher than 5km / h, simply press the selector lever Button to move the selector joystick into or out of the "N" position.
    D. "D" bit. In the "D" position, the automatic transmission control unit can control the automatic transmission according to the parameters such as the vehicle speed and the throttle opening degree, and the automatic transmission control unit can control the automatic transmission in the first gear In the automatic switch.
    E. "3". "3" for the slope of the file, in the slope of the road can be used when the "3" bit, then the transmission will be in a file -3 file in the automatic shift, but not into the 4 files, so that the next Slope to improve the engine braking effect.
    F. "2" bit. "2" bit for the long slope, in the face of a longer distance when the slope can be used "2", automatic transmission control unit according to the speed and throttle opening changes, control the vehicle in 1 and 2 files automatically Shift. So that on the one hand to avoid hanging into the unnecessary high-speed gear, on the other hand in the downhill can make better use of the engine power system effect.
    G. "1" bit. "1" bit for the steep slope, in the upper and lower very steep slope can be used when the "1" bit. In the "1" bit, the car will always be in a file driving state, and not into the other three forward file. So that on the one hand can ensure that there is sufficient power when climbing, on the other hand in the downhill to maximize the use of the engine braking effect.
    201M automatic transmission of the use of attention
    A. Only when the selector lever is in the "P" and "N" positions can the engine be started.
    B. A motor with an automatic transmission can not start the engine with a traction or push method because the ATF (automatic transmission fluid) pump does not work and the automatic transmission can not establish a normal working oil pressure.
    C. The "P" position can be used as an auxiliary brake for parking brake, but can not replace the parking brake.
    D. When stopping for a short time (for example, when the traffic signal is red), you do not have to change the selector handle to "N". You only need to step on the brake pedal.
    E. When the vehicle is towed, the selector handle should be placed in the "N" position, but the traction speed can not exceed 50km / h, the traction distance can not exceed 50km.